Views:

View, edit, trigger, and see results for your configured network scans.

The Network scans tab displays your currently configured scans along with the scan status, details, and trigger method. The following table details the actions available in Network scans.
Action
Details
Trigger a scan
Click the run icon (trash_icon=GUID-47cf6867-6315-438e-8670-86ff36f22a28.png) to manually trigger a scan. Scans already in progress during the scheduled scan time will take place at the next scheduled time.
View and edit scan details
Click the name of a scan to view the scan details and edit the configuration.
Note
Note
  • Discovery scans use TCP SYN scanning by default for less intrusive and more reliable scanning.
  • The default scan targets for a discovery scan are the top 1,000 most common TCP ports. You can edit the setting to choose the top 1,000 most common UDP ports, all most common TCP/UDP ports, or all TCP ports. For a list of all top 1,000 TCP ports, click here. For a list of all top 1,000 UDP ports, click here. Broader scans may take longer.
View last scan report
Click View in the Last scan report column to see details of the last scan report in Scan reports. Only the most recent scan report for the scan is available.
Change scan status
Change the scan status to enabled or disabled in the Status column. Disabling a scan does not delete any previously generated scan reports.
Delete a scan
Click the delete icon (trash_icon=GUID-47cf6867-6315-438e-8670-86ff36f22a28.png) to delete the scan. Deleting a scan does not delete any previously generated scan reports. The last report for a deleted scan is available in Scan Reports.
Comments (0)